Products

Commerical Application

• Engine Mounts
• Vibration Isolation
• Machinery Mounts

• Firestone and
Bridgestone Machinery
Mounts

Military Application

• Mounts, Seals, Bumpers
and more

Aircraft and FAA Application

• Experimental and
Certified Engine Mounts

• STC's (Supplemental
Type Certification)

Products

Commercial Application
Engine Mounts • Vibration Isolation • Machinery Mounts

Products		Part #		Description
		Cushion Commector		For compression loads up to 13.3 lbs. Shear loads up to 6.4 lbs. Custom work available. Call for additional sizes.
		E-109		Used for a wide variety of applications, where a large degree of dampening is needed.
		CA-1595		Engine mounting, air conditioning. Machinery mounting 200lbs-800lbs. Capacity nut retainer, ear holes .53 dia. Has a 1/2” bore only.
		CA-1290		Engine mounting, air conditioning, machinery mounting can be used in tandem to isolate vibration in compression and shear conditions. Available with 1/3, 5/8, or 3/4” bore only.
		CA-244 no.5, no.7		Light compressive loads in the range of 100 to 400 lbs. Machinery mounting. Engine mounts used where applicable. No.5 has 1/2”x -20 S.A.E. threads. No.7 has 3/8” -16 S.A.E. threads.
		11M15, 25, 50		Used for military applications. Durable and light. Compressive loads, HVAC, compressors. Call for specs and other application usage.
		VIP8692656		Plate mount used for lightweight applications. Loads up to 25lbs when used in conjunction. Up to 50lbs. Call for specs.
		NBD320, 321		Vibration dampener, machinery mount. Engine mount NBD 320 is normally used with rebound NDD-455. Loads up to 1600lbs. 321 up to 800lbs. .781 center hole diameter. Durometer strength 40,50,60,70.
		NDD455, 456		Engine mount. Compressors can be used in conjunction with the NBD320, 321, or by itself as a primary mount. Loads up to 400lbs. NDD455 has a .62 center hole diameter. NDD456 has a .90 center hole diameter. Durometer 40,50,60, and 70.
		VIP100-24SQ		Lightweight mounts. HVAC compressors light loads up to 5lbs. In conjunction up to 40lbs. 20-center whole diameter.
		CA368 no.6 thru 8		Motor isolators used for machinery mounting. Ra-diators, air compressors up to 200lbs. Limits the movement of machine caused by shock and vibration. .62 center hole diameter. Durometer: 40,50,60, and 70. Use of DA993 metal cup is recommended.
		S7400-3		Machinery mount. Heavy application, call for spec.
		CA368 1 thru 5		Motor isolators used for machinery mounting. Ra-diators, air compressors up to 200lbs. Limits the movement of machine caused by shock and vibration. .62 center hole diameter. Durometer: 40,50,60, and 70. Use of DA993 metal cup is recommended.
		1163302-04		Ideal for mounting heavy loads that need severe Isolation vibration. Engine suspension, machine mounts. Easily used as bumpers as well. 1163302-04 has 3/8" x 24 threads.
		CM1000; CM2000		Cup mounts protect against severe impact shock w/ efficient vibration isolation characteristics & freq. above 40Hz. Can be mounted in any direction for protection of electrical & mechanical equipment. CMJ10001/4”x20 center hole 140lbs max load. CM2000 3/8x16 center hole 250lbs max load.
		A CA244-7-60; B VIP117-645-0		Lightweight mounts 2-5lbs. Computers, refrigeration, compressors, electrical motors, bushing, lightweight application. Call for more info.
		K93501-15		Shear mount can be used for engine mount. Trans-mission mount, machine mount. Top bolts is 3.625. Center is 7/16” holes.
		10870335		Resilient mount. Can be used for a wide range of applications. Loads either vertically or horizontally. Has an axial displacement @ a load of 1,240lbs custom. Formulations of rubber may be done for more/less movement. 1.125 center hole diameter.
		DA993		Metal cup was designed for use with CA-368 mount. Employed to help separate the mounts and rebounds.
		SEW22181		Rubber coated bushing for head pulley. Call for more information on application.
		NBD6310		Firestone insulation, engine mount, machinery mount, radiators. Vehicle cabs both on and off road. Up to 700lb. Load deflection durometer. May vary to meet your requirements. Call for info.
		Cushion Bumpers		PMT offers a wide variety of bumpers (as shown).These 4 pictured are our most popular design, loads up to 250lbs. Flat nose, snub nose, and std. bumper style. Coming soon, a bumper is used for guitar amps and bass amps (feet bumper).
		VIP50074-11		Center bolt mount. Lightweight, 60lbs variety of applications. Call for more information.
		VIP-117-645-0		Pipe grommet, used for protection for metal tubing. Different sizes available, call for more info
		VIP80-0150; 80-130; 80-131; VIP40-0150; 20-0130		PMT manufacturers a few sizes of pipe/pressure vessel. Saddles to aid in cushioning your piping from surrounding vibration disturbances. For sizes in stock, please call.
		M2318-07; M2319-07		Fluted sleeve used for panel applications.
		VIP117-341-2		Oval mounts are also used for panel applications. Call for information regarding rubber durometer.
		1CRE622 thru 6CRE622		Rubber grommet-tube cable pressure seal, panel as well.